ANSI 57-2 Transmission Line Post Porcelain Insulator/ OEM available/ Light gray
Descriptions:
1. Line post insulators shall conform in all respects to the requirements of ANSI standard.
2. The insulators shall be made of good commercial-grade wet-process porcelain.The entire surface of the insulator, with the exception of a firing surface, shall be glazed.If gray is required, it shall be in accordance with ANSI Z55.1-1967 (R1973).
3. Metal parts shall be made of a good commercial grade of malleable iron, ductile iron, steel, or
aluminum. Ferrous parts, other than stainless steel, shall be galvanized in accordance with ASTM A153.
Technical requirements:
1.Creepage distance: 559mm
2.Cantilever strength: 12.5kN
3. Low frequency flashover voltage: Dry: 100kV Wet: 70kV
4. Critical impluse flashover voltage: Positive: 160kV Negative: 205kV
5. Radio Influence voltage: Test voltage to ground: 22kV
Pre-sales service:
Choose the proper reactor type
Installation recommendations and to provide technical information
Satisfied users of the special design requirements
After-sales service:
Offer professional equipment installation instructing
Provide spare parts for wearing parts(such as post insulator, bolt, etc.)
Our products are sold all over the world, you can rest assured.
