Description:
1. Our insulators have externally attached caps and bases. A highly engineered cementing system transfers the load uniformly from the hardware into the porcelain body.
2. Each insulator body is made from the highest quality clay raw materials that have been processed to be fully vitrified porcelain. The body is glazed to add strength to improve surface appearance, and enhance clean-ability.
3. Either chocolate brown or Munsell gray glaze is available. caps and flanges are ferrous, hot dip galvanized. thread holes are proper tapped.
Specifications:
| Model | C6-750 |  |
|
| Creepage Distance(mm) | 4250 | ||
|
Failure load (kN)
|
Bending strength | 6 | |
| Trosional strength | 3 | ||
|
Main Dimensions (mm)
|
H | 1700 | |
| φD | 208 | ||
| a1 | 4-φ18 | ||
| Φd1 | 121 | ||
| a2 | 4-φ18 | ||
| Φd2 | 121 | ||
| Lightning Impulse Withstand Voltage(kV) | 750 | ||
| Power Frequency Wet Withstand Voltage(kV) | 325 | ||
Technical requirements:
1. Glaze: Brown
2. Creepage distance: 4250mm Length: 1700mm
3. Weight: 88.0kgs
4. Flange material: Aluminum alloy or stainless steel
4. Package type: Wooden case
Application:
Ceramic pillar insulators are used for insulation and support of live parts in outdoor power plants, distribution devices and electrical equipment of power frequency AC substations.
Competitive advantages:
Reasonable insulation structure high reliability of inter-turn insulation.
Small volume light weight
Stainless steel flange low magnetic inductivity high resistivity.
Convenient transportation and flexible installation.
Low loss
Low temperature rise
High mechanical strength, strong weather ability.
Outstanding crack resistance.
Low thermal expansion coefficient
Our products are sold all over the world, you can rest assured.
